產品簡介
▲ 世界壓縮機雙螺桿系列壓縮機。雙螺桿5:6齒數比及的線型設計，節能高效。高效活閥能量控制，實現分級或無級能量控制。平衡設計，運轉超靜平穩。運動部件嚴格處理，特殊排氣處油平衡塊設計，維修周期長，運行40000小時以上。高效油分離器排氣帶出油量小于1.5%，有效提高兩器換熱，更加節能耐用。
▲ 新型高效蒸發器:日本神戶高效內螺紋銅管，增強傳熱效果，更加節能高效。運用CAD/CAM設計加工技術，CNC加工中心制作完成，結構緊湊，體積小巧，經久耐用。U型結構的換熱管束，可整體抽出清洗內部水垢，方便維修保養。干式蒸發器，方便回油，提高壓縮機壽命和系統的可靠性。
▲ 風冷式冷凝器:散熱翅片由高速沖床沖孔，翻片質量可靠。二次翻邊，銅管與翅片更加緊密接觸，換熱效率高。采用全進口銅管和全自動彎頭焊接，大大增強了氧密性，杜絕制冷劑泄漏現象。尤其適合水資源缺乏或水質硬度高的地區使用。
▲ 微處理控制系統:工業級PLC機組集中控制，配合壓縮機的能調系統，可及時準確控制機組制冷量與冷負荷的匹配，保證機組以效率運行，降低運行費用。內部集成斷水、低溫、高低壓、防凍、缺相、延時啟動、逆相、過載、電機過熱，油壓差等多項安全保護及處理功能。
▲ World famous twin-screw compressor imported compressors.twin-screw gear ratio of 5:6 and advanced linear design, energy efficient. High-energy live valve control, can achieve grade-level or no control. Balanced design, ultra-quiet operation smooth. Strictly deal with moving parts, special exhaust at oil balance block design,maintenance, long life cycle, failure-free operation for more than 40,000 hours. Efficient oil separator,exhaust out of fuel less than 1.5%, to effectively improve the two exchanger, more energy-efficient and durable.
▲ New highly efficient evaporator: Kobe, Japan, the latest high efficiency inner grooved copper tube, enhanced heat transfer,more energy efficient. Using the latest CAD / CAM design and processing technology, CNC machining centers produced,compact, compact, durable. U-beam structure of the tubes can be cleaned out within the overall scale, to facilitate maintenance. Dry-type evaporator, to facilitate oil return, increase compressor life and system reliability.
▲ Air-cooled condenser: cooling fins from the high-speed punch press punching, turning pieces and reliable quality. Second flange, brass and fin closer contact, heat transfer efficiency.All-imported brass elbow and move the whole welding, greatly enhancing the density of oxygen, to prevent refrigerant leakage.In particular, water scarcity or water hardness for areas of high use.
▲ Microprocessor control systems: industrial PLC centralized control unit, the energy transfer system with the compressor,the unit can be timely and accurate control of cooling capacity and cooling load of the match, to ensure the unit is running at optimal efficiency, reduce operating costs. Integrated water,low temperature, high and low pressure, antifreeze, phase,delay start, reverse phase, overload/ overheating, oil pressure and poor security and a number of processing functions.
